Difference between revisions of "IProjection"
(→‎Using iProjection)
Line 23: Line 23:
 
Use this software to wirelessly project your computer via the Epson Projection Software, also known as iProjection. (if using video or sound, please use the wired connection for best results)
 
Use this software to wirelessly project your computer via the Epson Projection Software, also known as iProjection. (if using video or sound, please use the wired connection for best results)
  
−
#Turn on projector by pressing the '''On''' button on the Crestron Panel (white box mounted on wall)
+
Some necessary College-wide changes to the wireless network have altered the process for connecting to projectors with iProjection in campus classrooms. 
−
#Choose '''EasyMP/Network/iProjection/LAN''' source on Crestron Panel
+
 
−
#Connect laptop to '''鶹Ƶ''' or '''鶹ƵSecure'''
+
Users will need to use a manual connection method. After initial setup, you will be able to save the profile for future use.
−
#Open iProjection software on laptop. (If it isn't already installed, please feel free to download iProjection)
+
 
−
#Choose '''Advanced Connection Mode''', and click box to always use this method.
+
To manually connect and save a profile:
−
#Choose the projector by '''checking the box''' that corresponds to the room you are in and click '''Join''' (look for room number)
+
 
−
#If you want to be sure that nobody takes control of your screen, be sure to select the '''disable interrupt''' checkbox
+
#Turn on the projector and set it for wireless projection (by pressing the '''EasyMP/Network/iProjection/LAN''' button.
 +
#Open '''iProjection''' on your computer, choose '''Advanced Connection Mode''', and click box to always use this method.
 +
#Click on the '''Manual Search''' tab on the left.
 +
#The projector will display the IP address (example 138.236.178.058) for the projector.  '''Enter the ip address''' into the search bar at the top of the iProjection window and click '''Search'''.
 +
#In the results area, '''click''' the check box for the projector and then click the '''Register''' button.
 +
#Click on the '''Create New Folder''' button and name the folder what you like.
 +
#The folder with that projector will appear on the left.
 +
#In the future when you open iProjection, open the folder and double click on the desired projector, check the box and click '''Join'''.
 
#When done, click '''Leave''' using the iProjection software, confirm you want to disconnect, and turn projector '''off'''
 
#When done, click '''Leave''' using the iProjection software, confirm you want to disconnect, and turn projector '''off'''
 +
 +
To add additional projectors to your profile follow the same directions, click the Register button and add it to your folder or create a new folder.
 +
If you previously typed in an IP address, it should appear in the drop down list, but the name may not be displayed.

Revision as of 15:12, 8 September 2020

iProjection is the successor to EasyMP. EasyMP and iProjection are the mechanisms for wireless projection at 鶹Ƶ.

Compatibility

iProjection will work with Epson's newest projectors, however they do not support Epson's oldest projectors.

Compatible Projectors

  • Epson 1945w (Confer/Vickner/Campus Center/Fine Arts/Olin)
  • Epson 5650 (Beck Classrooms)
  • Epson 710Ui (Olin 321 and Nobel South)
  • Epson L615U (Olin 220 and Nobel South)

Not Compatible

  • Epson Short Throw 450Wi (Olin 219)

Download iProjection

iProjection can be .

Installing iProjection

  • When installing, please choose Standard Installation when prompted. On MacOS computers, you will need to visit the System Preferences and allow an extension to be installed.

Using iProjection

Use this software to wirelessly project your computer via the Epson Projection Software, also known as iProjection. (if using video or sound, please use the wired connection for best results)

Some necessary College-wide changes to the wireless network have altered the process for connecting to projectors with iProjection in campus classrooms.

Users will need to use a manual connection method. After initial setup, you will be able to save the profile for future use.

To manually connect and save a profile:

  1. Turn on the projector and set it for wireless projection (by pressing the EasyMP/Network/iProjection/LAN button.
  2. Open iProjection on your computer, choose Advanced Connection Mode, and click box to always use this method.
  3. Click on the Manual Search tab on the left.
  4. The projector will display the IP address (example 138.236.178.058) for the projector. Enter the ip address into the search bar at the top of the iProjection window and click Search.
  5. In the results area, click the check box for the projector and then click the Register button.
  6. Click on the Create New Folder button and name the folder what you like.
  7. The folder with that projector will appear on the left.
  8. In the future when you open iProjection, open the folder and double click on the desired projector, check the box and click Join.
  9. When done, click Leave using the iProjection software, confirm you want to disconnect, and turn projector off

To add additional projectors to your profile follow the same directions, click the Register button and add it to your folder or create a new folder. If you previously typed in an IP address, it should appear in the drop down list, but the name may not be displayed.

Retrieved from "/gts/w/index.php?title=IProjection&oldid=38302"