Technology Services Wiki - User contributions [en]

�鶹��Ƶ Wireless Network

2022-10-04T20:20:54Z

Doachs:

�鶹��Ƶ uses Aruba Networks wireless controllers and access points. We typically see 5000 active clients on the �鶹��Ƶ wireless network daily, but more than 10,000 unique devices will connect every month.

There are many challenges to managing such a large wireless network, interference from other devices is the most common cause of connection issues. Microwave ovens, Bluetooth devices, cordless phones, video cameras, game consoles, Roku, home routers, mobile hotspots, and more, can cause interference with the �鶹��Ƶ wireless network. For the best experience on campus, �鶹��Ƶ Technology Services recommends 5 GHz or “Dual Band” devices be used whenever possible.

==Network Registration==
All �鶹��Ƶ-owned network devices on the campus network must be registered. Student devices, employee personal devices, and Guests of the College can connect to the �鶹��Ƶ wireless network without registering.

For more help or information please see: [[Guest Network Access]]

==Wireless Networks, GHz and Mbps, Why Do I Care?==
2.4 GHz, 5 GHz AC, 802.11a, 802.11n, channels and Mbps what does it all mean?

Wireless signals come in two bands - 2.4 and 5 GHz. Wireless standards are named - 802.11A, B, G, N and AC. Different WiFi networks have different bands, standards and speeds.

The �鶹��Ƶ WiFi network has 2.4 GHz and 5 GHz (Dual) bands available, the 5 GHz will work better in more places, be faster and less likely to disconnect.

If you are looking to buy a new computer or network device, be sure to buy one with 5GHz AC or Dual Band wireless. All new Macintosh laptops are 5 GHz AC. If you are buying a Windows computer, be sure it has 5 GHz AC. You will have a better wireless experience at �鶹��Ƶ. Please see [[Tips for Purchasing a 5 Ghz Windows Laptop]].

==Wireless locations on campus==
Nearly all locations on campus are covered by the �鶹��Ƶ wireless network, with a few exceptions. You may experience limited connectivity or poor connectivity depending on your location within a building.

If you are experiencing problems with the wireless or wired network, we have developed a survey for diagnosing and reporting network problems. Please complete the [/gts/forms/network-diagnostic-survey.php Network Diagnostic Survey].

Most outdoor areas within the ring road are also covered by the �鶹��Ƶ wireless network.

==Wireless in the residence halls==
The �鶹��Ƶ wireless network is available in all the campus [[residence halls]]. The wired network is also available in most campus residence halls.

The wired network offers an alternative to the wireless network. If you do not have an Ethernet cable, please stop by the Technology Helpline, they are available free of charge to Gusties living on campus.

If you are experiencing problems with the wireless or wired network, we have developed a survey for diagnosing and reporting network problems. Please complete the [/gts/forms/network-diagnostic-survey.php Network Diagnostic Survey].

==Recommended Streaming Devices at �鶹��Ƶ==
Due to the nature of the �鶹��Ƶ wireless network, not all streaming devices work as intended. Devices such as the Google [[Chromecast]] which rely on broadcast traffic, cause unsustainable interference on an enterprise wireless network. Please visit [[Streaming Device]] for more information regarding supported streaming devices.
==Wireless locations off campus==
Off campus, �鶹��Ƶ housing help - [/gts/Off_Campus_Wireless Off Campus Wireless].

==Connecting to the wireless network==
The use of the �鶹��Ƶ Wireless network no longer requires registration.

==�鶹��Ƶ Secure Networks==

{| class="fancy"
|-
! Zone || Password || Usage
|- class="odd"
| '''�鶹��ƵSecure'''|| �鶹��Ƶ username and password|| �鶹��Ƶ Community. Offers the best security
|}

===''�鶹��ƵSecure'' wireless network===

The �鶹��ƵSecure network uses 802.1X authentication and will only work on devices that support 802.1X authentication. Devices designed for home use such as Google Chromecasts, AppleTVs, smart TVs, and game consoles do not support this type of authentication and should connect to the ''�鶹��Ƶ'' legacy network.

*On your device, select the ''�鶹��ƵSecure'' wireless and connect.
*You will receive a prompt to enter your �鶹��Ƶ username and password. (Anytime you change your gustavus e-mail password, you will need to enter your new password to connect to the ''�鶹��ƵSecure'' network.)
*Depending on your device, you will next receive a prompt to accept the certificate. Please read below for additional information about your specific device.
*When this certificate expires and has to be renewed, you may need to trust it again on your device. Please check the thumbprint below to verify the certificate before trusting it.
'''It is very important to make sure the certificate matches the the thumbprint or server name or you could be connecting to a malicious rogue wireless server.'''

*�鶹��Ƶ server name
**'''rad.gustie.gac.edu'''
*Root CA
**'''GUSTAVUSROOTCA''' OR '''DigiCert High Assurance EV'''
*Certificate Thumbprint
**2014: '''‎04 3e 63 2c 09 b7 3e d5 0a 34 09 34 d5 98 7d b8 43 bc 8f 9a'''
**2017: '''‎07 96 7f 86 84 34 20 d9 24 4c 8f 12 26 14 b2 b3 39 59 7c da'''

====Windows====
#Connect to ''�鶹��ƵSecure''
#Enter your gustavus e-mail username (without @gustavus.edu) and your e-mail password.
#Click '''connect''' to accept the certificate for ''�鶹��ƵSecure''.
[[File:Win7rad.PNG]] [[File:Win8rad.jpg]] [[File:Win8_1rad.PNG]]

====Mac OSX====
#Connect to ''�鶹��ƵSecure''
#Enter your gustavus e-mail username (without @gustavus.edu) and your e-mail password.
[[File:osxwifilogin.png|250px|]]
<ol start="3">
<li>Click '''continue''' to accept the certificate for ''�鶹��ƵSecure''. The root CA can be ''GUSTAVUSROOTCA'' OR ''DigiCert High Assurance EV''.</li></ol><br /> [[File:osxwificert.png|250px]]

====ChromeOS====
#Connect to '''�鶹��ƵSecure'''
#Under EAP Method, select PEAP
#Under Phase 2 Authentication, choose Automatic
#Under CA certificate, choose Do Not Check
#Enter your �鶹��Ƶ username and password
#Click Connect

[[File:Chromebooksecure.png|300px]]

====Android====
=====Stock Android=====
#From the Android home screen, tap Menu, then tap settings.
#Tap Wifi, turn wifi on
#Connect to ''�鶹��ƵSecure''
#Under '''EAP Method''', select ''PEAP''
#Under '''Phase 2 authentication''', select ''None''
#Under '''CA Certificate''', select ''use system certificates''
#Under '''Domain''', type gustie.gac.edu
#Enter your �鶹��Ƶ e-mail username (without @gustavus.edu) under '''Identity''' and your e-mail password in the '''Password''' field.<br />
=====Samsung Android=====
Some Android devices do not automatically display the options above. On these devices, please follow the steps below:
#Connect to ''�鶹��ƵSecure''
#In the menu that pops up
#Choose EAP method - PEAP
#Choose None for Phase 2 authentication.
#Under "CA Certificate", choose "Don't Validate".
#Under identity, enter your �鶹��Ƶ username.
#under password, enter your �鶹��Ƶ email password.
#Click Connect.

====iOS====
#From the Home Screen, tap Settings
#Tap Wi-Fi
#Connect to �鶹��ƵSecure
#Enter your �鶹��Ƶ e-mail username (without @gustavus.edu) and your e-mail password.
[[File:Iphonewifilogin.png]]
#Click '''accept''' or '''Trust''' to approve the certificate for ''�鶹��ƵSecure''. The root CA can be ''GUSTAVUSROOTCA'' OR ''DigiCert High Assurance EV''<br />[[File:iphonewificert.png]][[File:Iostrustwifi.png]]

==�鶹��Ƶ Networks for legacy devices (can use Open Wireless Encryption depending on device support)==

{| class="fancy"
|-
! Zone || Password || Usage
|- class="odd"
| �鶹��Ƶ || || �鶹��Ƶ Community (open network)
|- class="odd"
|}

==Editing saved wireless networks==
In order to connect to the new networks, �鶹��Ƶ and �鶹��ƵSecure, it may help to forget the old wireless networks in your preferences.

===Windows===
#Start Button
#Control Panel
#Network Sharing Center
#Manage Wireless Networks
#Highlight the network �鶹��ƵSecure and then click Remove.

===Mac OSX===
#Open System Preferences
#Click on the Network menu
#Make sure Wifi is selected on the left
#Click Advanced (lower right hand corner)
#In the Preferred Network box, find and highlight GACwireless, GACmobile, GustieGuest, and GACsecure and click the (-) symbol to forget them.

===iOS===
#Settings menu from Home Screen
#Tap Wi-Fi
#Tap the blue "i" next to the network you would like to forget
#Tap '''Forget Network'''

==Problems with wireless==
In some locations on campus, the wireless network is slower and less reliable than the �鶹��Ƶ wired network. The wireless network is a shared resource, with all the wireless devices sharing the bandwidth.

Many different devices can cause interferance with wireless signals. These devices may include:
*2.4 Ghz cordless phones
*personally owned wireless routers, streaming devices such as Rokus, Chromecasts, printers
*microwave ovens

If you see networks advertised besides �鶹��ƵSecure and �鶹��Ƶ - those networks (devices) are causing connectivity issues for others.

If you are experiencing problems with the wireless network, we have developed a survey for diagnosing and reporting network problems. Please complete the [/gts/forms/network-diagnostic-survey.php Network Diagnostic Survey] from the location where you are having problems.

==Troubleshooting wireless connections==
If you are having trouble using the wireless network

*restart your computer or device.
*verify that your network card is turned on and receiving a signal (using your card manager software or control panel).
*make sure others around you are able to receive a signal. If multiple users are experiencing issues, please contact the Technology Helpline (507-933-6111) or [mailto:helpline@gustavus.edu helpline@gustavus.edu] to report an outage.
*To refresh your device's connection to the wireless network, in your device's network settings, "forget" the �鶹��Ƶ wireless networks and then try to reconnect.
*check for advertised networks besides �鶹��Ƶ and �鶹��ƵSecure - those networks (devices) may be causing your problems, ask the owner to shut off the device.
*If you are in a location that is getting a poor signal, please complete the [/gts/forms/network-diagnostic-survey.php Network Diagnostic Survey] from the location where the signal is poor.
*move to a location where you know the signal is strong (Olin Hall Computer Lab or the Library).
*plug in with an Ethernet cable to a network port, until you get your wireless working.
*please complete the [/gts/forms/network-diagnostic-survey.php Network Diagnostic Survey] from the location where you are having problems.
*contact the Technology Helpline (507-933-6111) or [mailto:helpline@gustavus.edu helpline@gustavus.edu] for assistance.

{{tech help}}

[[Category:Wireless]]
[[Category:Networking]]

Duo TF - Device Replacement for End Users

2020-02-25T18:44:24Z

Doachs:

If you are a Duo Two Factor Authentication user and you have replaced your smart phone, and you use it as one of your authentication methods, these directions will help you get Duo working on your new device.

{{DuoTwoFactorQuickLinks}}
==If You Can Authenticate==
If you are a Duo Two Factor user, and you have a new phone and any one of the following is true:
*you still have the old phone and it works
*your new phone has the same number as the old phone and you can receive calls on it
*you have Duo configured to call an alternate phone number, and you have access to that phone
*you have access to bypass codes
you can add the new device yourself.

'''You can add the new device by modifying your settings in Duo'''.
*Visit the [/account/manageTwoFactor �鶹��Ƶ DUO Management] portal. Log in and authenticate with the method you have available (from the above list). Click '''Device Options''' next to the phone number. Click '''Reactivate DUO Mobile''' and follow the prompts to set up the DUO mobile app on your new device.

==If You Cannot Authenticate==
If you are a Duo Two Factor user, and you don't have access to your authentication method because:
*you do not have your old smartphone, or it doesn't work
*you got a new phone, and it does not have the same number as the old phone
'''And'''
*you do not have an alternate authentication method (Land Line/Office Phone, FOB)
you will need to contact the Technology Helpline (507-933-6111) and ask to speak with a full time employee.

==Troubleshooting==
===When typing in my phone number during the "Add Device" process, it won't let me verify my phone number.===
Please log out and restart the "Add Device" process.

==See also==
===GTS Staff===
Please see: [[Restricted:Duo TF - Device Replacement for GTS Staff | Device Replacement for GTS Staff]].

Wireless Projectors

2020-02-25T16:41:42Z

Doachs:

�鶹��Ƶ Technology Services has wireless projectors in most classrooms. With these projectors, you are able to connect wirelessly to these projectors from your laptop, allowing for greater flexibility and mobility. For a demonstration, please stop by the Technology Services office for more information.

==Advantages==
*Able to move around the room with your laptop while wirelessly projecting your laptop's screen.
*No cables or wires needed.

==Disadvantages==
*Streaming video will not work as well as it would if it was connected with a VGA or HDMI cable.

==Epson iProjection Software==
Epson iProjection is the software used for these connections. It is available for Macintosh, Windows, Android, or iPhone.

[https://epson.com/Support/wa00723 https://epson.com/Support/wa00723]

Epson Projection Software

2020-02-21T21:29:05Z

Doachs: /* For Windows Computers */

The Epson projectors at �鶹��Ƶ are all capable of being used wirelessly if the correct software has been installed on your computer. This program is EasyMP. The current version of the EasyMP software is version 2.8.

In addition, some of the projectors are capable of being used as interactive whiteboards with additional software.

== Software ==
===Description===
* [[EasyMP]] allows a computer to project wirelessly. All Epson projectors on campus have this feature enabled. This software will not work on the newer projectors on campus.
* [[iProjection]] is the new version of the EasyMP software. This software works with all new projectors, and most of the older projectors on campus, but not all. If you are in Nobel Hall, please use [[iProjection]].
* Easy Interactive Driver allows you to use interactive tools (pen) to draw on the projected image. The interactive tools are available on the Epson short throw projectors on campus.
* Easy Interactive Tools enables a pallet of tools to draw on the screen and then capture your notes as an image.

=== For Windows Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16189.exe https://ftp.epson.com/drivers/epson16189.exe]
* [[Easy Interactive Driver]] [https://ftp.epson.com/drivers/epson19469.exe https://ftp.epson.com/drivers/epson19469.exe]
* [[Easy Interactive Tools]] [https://ftp.epson.com/drivers/EIT_5.00.exe https://ftp.epson.com/drivers/EIT_5.00.exe]

=== For OS X (Apple) Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]
* [[Easy Interactive Driver]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]
* [[Easy Interactive Tools]] [https://ftp.epson.com/drivers/EIT_5.01.dmg https://ftp.epson.com/drivers/EIT_5.01.dmg]

Epson Projection Software

2020-02-21T21:24:10Z

Doachs: /* For OS X (Apple) Computers */

The Epson projectors at �鶹��Ƶ are all capable of being used wirelessly if the correct software has been installed on your computer. This program is EasyMP. The current version of the EasyMP software is version 2.8.

In addition, some of the projectors are capable of being used as interactive whiteboards with additional software.

== Software ==
===Description===
* [[EasyMP]] allows a computer to project wirelessly. All Epson projectors on campus have this feature enabled. This software will not work on the newer projectors on campus.
* [[iProjection]] is the new version of the EasyMP software. This software works with all new projectors, and most of the older projectors on campus, but not all. If you are in Nobel Hall, please use [[iProjection]].
* Easy Interactive Driver allows you to use interactive tools (pen) to draw on the projected image. The interactive tools are available on the Epson short throw projectors on campus.
* Easy Interactive Tools enables a pallet of tools to draw on the screen and then capture your notes as an image.

=== For Windows Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16189.exe https://ftp.epson.com/drivers/epson16189.exe]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe]
* [[Easy Interactive Tools]] [https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe]

=== For OS X (Apple) Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]
* [[Easy Interactive Driver]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]
* [[Easy Interactive Tools]] [https://ftp.epson.com/drivers/EIT_5.01.dmg https://ftp.epson.com/drivers/EIT_5.01.dmg]

Epson Projection Software

2020-02-21T21:22:08Z

Doachs: /* For OS X (Apple) Computers */

The Epson projectors at �鶹��Ƶ are all capable of being used wirelessly if the correct software has been installed on your computer. This program is EasyMP. The current version of the EasyMP software is version 2.8.

In addition, some of the projectors are capable of being used as interactive whiteboards with additional software.

== Software ==
===Description===
* [[EasyMP]] allows a computer to project wirelessly. All Epson projectors on campus have this feature enabled. This software will not work on the newer projectors on campus.
* [[iProjection]] is the new version of the EasyMP software. This software works with all new projectors, and most of the older projectors on campus, but not all. If you are in Nobel Hall, please use [[iProjection]].
* Easy Interactive Driver allows you to use interactive tools (pen) to draw on the projected image. The interactive tools are available on the Epson short throw projectors on campus.
* Easy Interactive Tools enables a pallet of tools to draw on the screen and then capture your notes as an image.

=== For Windows Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16189.exe https://ftp.epson.com/drivers/epson16189.exe]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe]
* [[Easy Interactive Tools]] [https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe]

=== For OS X (Apple) Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]
* [[Easy Interactive Driver]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]
* [[Easy Interactive Tools]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]

Epson Projection Software

2020-02-21T21:20:32Z

Doachs: /* For OS X (Apple) Computers */

The Epson projectors at �鶹��Ƶ are all capable of being used wirelessly if the correct software has been installed on your computer. This program is EasyMP. The current version of the EasyMP software is version 2.8.

In addition, some of the projectors are capable of being used as interactive whiteboards with additional software.

== Software ==
===Description===
* [[EasyMP]] allows a computer to project wirelessly. All Epson projectors on campus have this feature enabled. This software will not work on the newer projectors on campus.
* [[iProjection]] is the new version of the EasyMP software. This software works with all new projectors, and most of the older projectors on campus, but not all. If you are in Nobel Hall, please use [[iProjection]].
* Easy Interactive Driver allows you to use interactive tools (pen) to draw on the projected image. The interactive tools are available on the Epson short throw projectors on campus.
* Easy Interactive Tools enables a pallet of tools to draw on the screen and then capture your notes as an image.

=== For Windows Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16189.exe https://ftp.epson.com/drivers/epson16189.exe]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe]
* [[Easy Interactive Tools]] [https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe]

=== For OS X (Apple) Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver4.00.dmg https://gts.gac.edu/gts/epson/EasyInteractiveDriver4.00.dmg]
* [[Easy Interactive Tools]] [https://ftp.epson.com/drivers/epson16807.dmg https://ftp.epson.com/drivers/epson16807.dmg]

Epson Projection Software

2020-02-21T21:18:17Z

Doachs: /* For Windows Computers */

The Epson projectors at �鶹��Ƶ are all capable of being used wirelessly if the correct software has been installed on your computer. This program is EasyMP. The current version of the EasyMP software is version 2.8.

In addition, some of the projectors are capable of being used as interactive whiteboards with additional software.

== Software ==
===Description===
* [[EasyMP]] allows a computer to project wirelessly. All Epson projectors on campus have this feature enabled. This software will not work on the newer projectors on campus.
* [[iProjection]] is the new version of the EasyMP software. This software works with all new projectors, and most of the older projectors on campus, but not all. If you are in Nobel Hall, please use [[iProjection]].
* Easy Interactive Driver allows you to use interactive tools (pen) to draw on the projected image. The interactive tools are available on the Epson short throw projectors on campus.
* Easy Interactive Tools enables a pallet of tools to draw on the screen and then capture your notes as an image.

=== For Windows Computers ===
* [[EasyMP]] [https://ftp.epson.com/drivers/epson16189.exe https://ftp.epson.com/drivers/epson16189.exe]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe]
* [[Easy Interactive Tools]] [https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe]

=== For OS X (Apple) Computers ===
* [[EasyMP]] [https://gts.gac.edu/gts/epson/EasyMP2-85.dmg https://gts.gac.edu/gts/epson/EasyMP2-85.dmg]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver4.00.dmg https://gts.gac.edu/gts/epson/EasyInteractiveDriver4.00.dmg]
* [[Easy Interactive Tools]] [https://gts.gac.edu/gts/epson/EasyInteractiveTools4.10.dmg https://gts.gac.edu/gts/epson/EasyInteractiveTools4.10.dmg]

Home directory

2019-09-04T17:37:47Z

Doachs:

A '''home directory''' (often referred to as a '''Z-drive''', since "Z" is the default network drive letter on [[Windows]]) is a networked personal storage space for all students, faculty, staff, and administrators. This space can be used to save papers, syllabi, pictures, [[e-mail]], and other documents. Home directories are also used to store user's [[personal homepages]]. This storage is backed up every night to ensure your data is safe. For large files, please use [[Google Drive]].

Currently users are given '''1''' [[Gigabyte|GB]] of storage space for files. If more home directory space is needed, [https://gts.gac.edu/gts/newtools/user/check-usage.php students can request a one time addition of space ].
==On-Campus Access==

===Windows 7/8/10===

# From the Start Menu/Start Screen, start typing '''Computer''' or '''This PC'''
#Right Click on '''Computer''' or '''This PC''' and select '''Map Network Drive''' from the list of options on the bottom
# Input the following information:
## '''Drive:''' Z
## '''Folder:''' \\home.gac.edu\username
## Check '''"Reconnect at logon"'''
## Click on '''"Connect using a different user name"'''
## Click on '''Finish'''
## When prompted, input your �鶹��Ƶ username and password

====If you have problems connecting, do the following:====
'''Change the Settings'''
# Press the Windows key (between Ctrl and Alt keys) and then the "R" key. A run dialog box will appear.
# Type "secpol.msc" (sans quotes) and press Enter
## Expand Local Policies
## Click on Security Options
## Double-click on "Network Security: LAN Manager authentication level"
### Change setting from "Send NTLMv2 response only" to "Send LM & NTLM - use NTLMv2 session security if negotiated". Click OK
You may need to reboot for this setting to take affect.

===Mac OS X===

# From the Finder, select '''Connect to Server''' from the '''Go''' menu
# Type '''smb://home.gac.edu/'''''username'' in the text box along the bottom replacing "username" with the users �鶹��Ƶ username. Click the '''Connect''' button.
# When prompted, enter your username and password
# Choose '''My Home Directory''' from the list that appears

Your home directory will now be mounted. For easy access in the future, drag your home directory icon to the right side of your dock.

----

==Off-campus access==
Off campus access to your home directory is available by using one of the following options.

===Via Remote Desktop (Employees Only)===
Please see [[Remote_desktop | Remote Desktop]].

===Via Virtual Lab===
[[Virtual_Lab | Virtual Lab]]
===Via Webmail===
Please note that this option is not available for GusMail users. To access your [[Home Directory]] via [[Webmail]] perform the following tasks:
# Log on to the �鶹��Ƶ [[Webmail]] service. [https://webmail.gac.edu https://webmail.gac.edu]
# Click on "File Manager"

You then will be able to browse your Home Directory. You can download these files by clicking the download icon.

==See also==
* [[Personal homepage]]
* [[Quota]]
* [[Virtual Lab]]
* [[Google Drive]]

{{Tech help}}

[[Category:Home directory]]

CAS

2017-05-08T20:38:43Z

Doachs:

CAS is a [http://en.wikipedia.org/wiki/Single_sign-on Single Sign On] protocol.

To use authenticate in a web application with �鶹��Ƶ credentials please make a request to noc@gac.edu and be prepared to configure your application with the following:

* CAS Login URL
** https://sso.gac.edu/idp/profile/cas/login
* CAS Logout URL
** https://sso.gac.edu/idp/profile/cas/logout
* Service Validate URL
** https://sso.gac.edu/idp/profile/cas/serviceValidate
* CAS Server hostname
** sso.gac.edu
* Port
** 443
* Login Assistance URL
** https://gts.gac.edu/gts/passwordreset/

If you need more info please contact noc@gac.edu

Epson Projection Software

2016-07-15T14:34:52Z

Doachs:

The Epson projectors at �鶹��Ƶ are all capable of being used wirelessly if the correct software has been installed on your computer. This program is EasyMP. The current version of the EasyMP software is version 2.8.

In addition, some of the projectors are capable of being used as interactive whiteboards with additional software.

== Software ==
===Description===
* [[EasyMP]] allows a computer to project wirelessly. All Epson projectors on campus have this feature enabled.
* Easy Interactive Driver allows you to use interactive tools (pen) to draw on the projected image. The interactive tools are available on the Epson short throw projectors on campus.
* Easy Interactive Tools enables a pallet of tools to draw on the screen and then capture your notes as an image.

=== For Windows Computers ===
* [[EasyMP]] [https://gts.gac.edu/gts/epson/EasyMP2-86.exe https://gts.gac.edu/gts/epson/EasyMP2-86.exe]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe https://gts.gac.edu/gts/epson/EasyInteractiveDriver1.10.exe]
* [[Easy Interactive Tools]] [https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe https://gts.gac.edu/gts/epson/EasyInteractiveToolsv3-06.exe]

=== For OS X (Apple) Computers ===
* [[EasyMP]] [https://gts.gac.edu/gts/epson/EasyMP2-85.dmg https://gts.gac.edu/gts/epson/EasyMP2-85.dmg]
* [[Easy Interactive Driver]] [https://gts.gac.edu/gts/epson/EasyInteractiveDriver4.00.dmg https://gts.gac.edu/gts/epson/EasyInteractiveDriver4.00.dmg]
* [[Easy Interactive Tools]] [https://gts.gac.edu/gts/epson/EasyInteractiveTools4.10.dmg https://gts.gac.edu/gts/epson/EasyInteractiveTools4.10.dmg]